How to stain a fence with a pump sprayer?

If you don’t want to use a bucket, another way to apply stain to a fence is by using a pump sprayer. This works best if you want to use a deeper color of stain. You can use a power washer to get the surface of the wood to a certain level of shine and then apply the color of your choice with a water-based hose nozzle. Be sure to allow the wood to dry completely before staining the fence again.

How to stain a metal fence with a sprayer?

If you have a metal fence, then you may want to consider a self-adhesive fence stain. These types of stains come in powder form, and you can apply them with a sprayer. You can also use a brush to get into those hard to reach areas. These stains are very easy to apply and don’t require any sanding before applying.

How to stain a fence with a garden sprayer?

If you have a garden sprayer handy, you can use that as well for applying a nice even coat of stain to your fence. The benefit of a garden sprayer is that you can control how much you want to apply of the finish. Less is more! You don’t want to over-stain your fence because you’ll end up with a darker color that will show every imperfection in the wood. A small can of stain should be all you need to cover an entire

How to stain a wooden fence with a sprayer?

Using a foam or gel stain, apply the product liberally to the fence as you would with a brush. Leave the stain on the fence for one to two hours, then apply a second coat. Let the fence dry for several hours before applying a protective sealer.

How to stain a chain-link fence with a sprayer?

For a fence that’s made from chain link, you can use a power washer to apply the stain. Set the fence in place and slowly work the denatured alcohol through it, then scrub the fence with a brush. If you have any rust spots, you can apply a zinc-rich sealer before staining. Or, you can also use a product made specifically to clean, seal, and dye metal fence posts.