How to start LoCs with 2 strand twist?

To start a 2-strand twist lock, you will need two key pieces: your regular key and an extra “key” that looks like a little rod. The key is essential for starting the lock and completing the twist. To start a two-strand lock, hold the key with the lock face pointed down and insert the key into the lock until it clicks. Turn the key clockwise while holding it in this position until the lock begins to twist. Continue turning the key as

How to start a LoCs with strand twist?

Take some new spools of loom. Now, take enough twists so that the ends of the two strands meet perfectly. Connect the two ends using an aluminum tape or a securing clip and cut the excess length. Generally, the length between the two ends is around 15 centimeters.

How to start twist loop LoCs with strand twist?

If you are new to the game, make sure you practice some simple loops to understand the techniques used. You can start by learning how to practice a two-strand twist loop. It is one of the easiest loops to learn and can be done with a few simple loops. The key is to keep the knot tight and even throughout. To practice, take a length of thin twine and hold it between your palms about two inches from the end. Make sure the twine is taut and

How to start LoCs with a strand twist?

The first thing you need to do when practicing your knot is to make sure you have the right tension on the rope and your knot is tight enough. If the knot is too loose, it will easily slip off. The same goes for the knot being too tight. If it’s too tight, it will be unable to hold together and will snap when tension is applied.

How to start LoCs with strand twist on creeks?

When starting a new creeked LoC, it’s important to start on the creek. The first few feet are critical to getting the line laid down correctly. The first few feet should be on the flat portion of the bank. If you start laying down the line too far up the bank, you could end up with a misaligned and uneven line or worse yet, end up with a tangled mess! When starting a creeked line, always make sure the line is laid down flat