How to string a guitar with bridge pins?

There are three main types of guitar bridges magnetic, truss and floating. We recommend getting a floating bridge if you plan to use metal strings, as these have the least amount of stretch. If you’re looking to keep costs down, a magnetic bridge is a great option, as the metal bridge pins are often just as sturdy as their truss counterparts, and are much cheaper to replace.

How to string a guitar with bridge pins and ball joints?

Simply put, bridge pins and ball joints are used on guitar bridges to secure the strings. They're essential to the structural integrity of the guitar, so your guitar bridge will definitely not last forever. If you're not sure if your guitar has these in place, you can use a guitar bridge pin test to check. Simply push down on the string at the bridge and listen for the sound of the pin. If you hear a click, then your guitar has bridge pins and ball joints.

How to connect a ukulele with bridge pins?

As mentioned earlier, the stringing process for a uke is much the same as it is for a guitar. If you’re wondering how to connect a uke to the bridge pins, you’ll want to use some stringing tape on the end of the string. When you get to the end of a string, simply press the tape down onto the bridge pin. This will help secure the string to the pin, but you’ll still want to make sure it�

How to connect 6 gauge string to a guitar with bridge pins?

You will need to use a hexagonal driver to hexagon the pin and a pair of pliers to pull the string through. Once you have the string on the pin, coat it in graphite lubricant to make it easier to move up and down the string. If the string isn’t quite aligned, you can tap it back into place with a rawhide mallet.

How to connect 6-string guitar with bridge pins?

One thing to remember is to never over-tighten the pins. Very few people will be able to notice that the string is a little looser than it should be. If the string tension is too loose, you will be able to hear a noise when you play chords. If the tension is too high, you will have to press harder to press down the strings.