How to take apart a PS4 controller and clean it?

Firstly, start by separating the left and right joysticks from the main body of the controller. The left and right joysticks are held in place by a single plastic clip, and to release them, push the two joystick halves in opposite directions while simultaneously holding the front of the joysticks in place. The joysticks are attached to the main body of the controller by a small piece of plastic, and to remove it, pull off the small plastic piece from the back of the left and right joysticks

How to clean a PScontroller console?

Always start with a clean slate to remove all of the gunk from inside your ps4 s controller. After removing all of the buttons, use a small brush to clean the interior of the controller where the buttons are located. This helps to get rid of any gunk and dust that could have built up over time. Now, turn on your PlayStation to start the cleaning process.

How to clean a PScontroller remote?

Before cleaning, make sure to unplug the controller from the console, and remove all the batteries. If you have small children, this is especially important as it is possible for them to swallow the batteries. After removing the batteries, carefully remove the plastic shroud covering the face buttons, joysticks and D-pad. Remember to always keep the plastic away from the electronics as it can cause corrosion. Now, use a dry cloth to clean the face buttons, a wet towel to clean the D-pad

How to clean a PScontroller cable?

You should first remove the small arrow-shaped piece at the end of the cable. This little piece is called the lock-ring. Once you’ve done that, you can remove the cable from the housing. Then, you can clean the cable and the connector end. You can clean the cable in warm soapy water or with a mild detergent. Let it dry thoroughly and repeat the process if you want a really clean cable. Afterward, you can either plug it back in or

How to clean a PScontroller?

There are different types of cleaning for different parts of the gamepad. For example, the D-pad, face buttons, and triggers are the most susceptible to getting dirty, so you should clean them first. Replace the D-pad and face buttons with new ones when they start to lose their responsiveness. The triggers should be cleaned regularly as well. If you play a lot of first-person shooters, chances are you’re going to be using the triggers a lot, so make sure you