How to take apart a PS4 controller to fix drift?

We’re going to assume you’ve already tried the above-mentioned fixes and, if so, you still have a drifting issue. Before you start trying to fix the problem, make sure you’ve completely disassembled your controller and cleaned all the parts inside thoroughly. Then, take the time to check all the connections and make sure they’re all tight and properly seated. One of these components could be causing the problem. If you’re still having trouble,

How to open up a PScontroller to fix drift?

If you have a problem with the thumbsticks of your PlayStation 4 controller drifting left or right, you can try to fix it by taking it apart. If you don’t know how to do that yourself, you should definitely watch a video on how to do it. It’s actually easier than it looks. Once you have it opened up, you’ll need to take out the small black rubber ‘pad’ that’s attached to the pad on the actual

How to fix a PScontroller drift?

The most common cause of the PScontroller’s drift is a loose or broken connection somewhere in the electronics. If your PScontroller’s joystick or triggers are moving all over the place, it could be because the connection between the stick or buttons and the circuit board is loose. This is one of the easiest faults to fix because there are usually no intricate wiring jobs involved, and it’s quite simple to do. All you need to do is gently push the

How to remove a PScontroller cable to fix drift?

Sometimes a simple issue can cause your gamepad to have a drifting issue. If the connection between your controller’s cable and the console is loose, it can cause your gamepad’s buttons to stick or become unresponsive. You can fix this by checking the cable connection. If the connection is loose, secure it using an extra screw. You can also try to push the cable connection into place to fix the issue.

How to fix a drifting PScontroller?

You pulled apart your controller and found out that the joystick is loose. If the joystick is loose, then it is obvious that the console will not be able to detect a directional input. You need to take out the screw that holds the joystick in place. Once you have done that, push the joystick back in and retest the game. A joint on the stick may be loose, but this will not affect the game. It will still work fine. However, if the joystick is loose and is