How to take apart a PS4 pro for cleaning?

Throughout the life of your playstation 4, you will likely need to clean your system from time to time. Whether it’s dust, gunk, or just a buildup of crud, we can clean virtually any part of the system, from the inside out. If you’re looking for a thorough cleaning process, we recommend starting with our system disassembly. This will allow you to safely access every part of your PlayStation 4 and remove any buildup or gunk that may be causing your

How to take apart a PSpro console for cleaning?

If you're not good at taking things apart, don't worry! The good news is that the playstation 4 Pro is very easy to disassemble. To take the console apart, simply remove the two screws that connect the optical drive and the main board to the motherboard and lift off the board. With the main board removed, you can access the RAM, GPU, and the hard drive.

How to take apart a PSpro case for cleaning?

In order to have easy access to the cleaning tab, remove the front panel. You will notice that there are two clips, each one controlling the removal of the front cover. These clips are very small and can be easily damaged, so make sure to keep them protected. Also, while the panel is detached, make sure to secure the small cable which holds the power button on. Finally, to access the cleaning tab, remove the screw securing the power supply.

How to open a PSpro for cleaning?

First, remove the power cable and the ethernet cable. Next, remove the two small screws that are under the front panel of the console. These screws are located on the left-hand side of the front panel. Now, lift up the front panel and remove it completely from the system. Now, you’ll see two small plastic blocks on each side of the system. Remove these as well. Now, you’ll be left with a thin plastic cover over the system, under

How to take apart a PSpro for cleaning and maintenance?

First, you will need to have a screwdriver handy. If you don’t have a screwdriver, your best bet is to remove the front cover and look for the screws that secure it. If you can’t find the screws, you will have to take the entire system apart. That will require removing the power supply, the motherboard, and the hard drive. Now you can take the system apart. You will find all of the screws securing the motherboard on the underside of the