How to take apart a PS4 pro slim?

If you’ve never taken apart a playstation before, it can be confusing! It doesn’t matter whether you own a PlayStation 2, PlayStation 3, or PlayStation 4, the procedure is pretty much the same. Before you begin, make sure to read the manual to learn the best way to do things. In addition, it can be helpful to watch a few videos online to learn how to do the steps properly. And if you don’t want to take your PlayStation apart yourself,

How to remove the motherboard of a PSpro?

The PlayStation 4 pro service requires that you replace your motherboard every time you want to do an update. To do so, take off the front cover of the console and remove the two screws securing the board to the back of the console. Now, take the board out of the case. The board is held on with eight small clips, each of which has a small plastic cover. These clips can be removed using tweezers. After doing so, you should be able to remove the board. There

How to remove the front panel of a PSpro?

Getting to the front panel on the PS4 pro is a bit trickier than on an original model. You need to find the two screws that secure the front panel to the main board, and then remove it. Once it’s off, you’ll be able to access the RAM, flash storage, and the Wi-Fi chip.

How to take apart a PSpro?

A PlayStation 4 Pro is easier to take apart than previous models of the console. The new color-coded console design makes it easier to identify the screws that hold the various components together. The removal of the motherboard and RAM make it easier to replace the board. In addition, the removal of the fan and fan shroud allows you to access the system’s power supply and heat sink. But before you begin to take apart your PlayStation 4, make sure you have all the necessary tools and know how

How to take apart a PSpro controller?

The new Slim design of the PlayStation 4 controller is much easier to dismantle! Once you have popped off the cover, you simply need to pull the top section off. Disconnect the two wires on the joysticks, then remove the rubber bumper and the faceplate. Push the L2 and R2 buttons in to separate the two halves of the joysticks, and the controller will come apart. Finally, stick the two halves together and you’re done!