How to take apart a PS4 pro to clean?

First, you need to understand that this is a complicated task, and it can be very risky if you are not experienced in doing this. If you do not have the proper tools, you can end up breaking your console This is why before you continue reading this guide, we recommend that you read up on some of the other related articles that we have available. Also, take some time to learn how to do it right. If you are not careful or if you do not have the right tools

How to take apart a PSpro to clean out the dust?

The first thing you will need to do is take off the faceplate. Now, you will need to press down on the joystick and the power button to turn the console off, and then disconnect the power cable and the HDMI cable. You should also remove the faceplate connected to the motherboard. The next thing you will need to do is press and hold the power button to put the system in standby mode. Now, using the provided screwdriver, you will need to unscrew the four screws that

How to take apart a PSpro to clean dust

The first thing you need to do when you want to clean your PlayStation 4 is to take it apart. This will allow you to have full access to the system itself, giving you easier access to dust and debris. The easiest way to do this is to use a Philips screwdriver if you have one handy. If you don’t have one, you can use a small flat screwdriver or even some tweezers to pull the screws apart. If you’re using tweezers

How to take apart a PSpro to clean controller?

The easiest way to clean your PlayStation 4 controller is to remove the battery and the memory card. With the batteries out of the way, you can take the top cover off, exposing the PCB and all the connections. With a small screwdriver, you can easily take off the two screws holding the board in place. After removing the board, you can now take apart the entire controller to clean it.

How to take apart a PSpro to clean case?

It is likely that you will have to take the case off if you plan to do a deep clean. It is important to know that the case is made from a combination of plastic and metal so when you remove it, it is likely that you will need to clean the plastic and metal portions separately. To remove the case, you will need to unscrew the four plastic corners on each side of the console. After removing the case, you can dust off any small pieces that may have collected inside.