How to take apart a PS4 slim?

To begin, remove the front cover and remove the screws securing the board to the main housing. Then, flip the board over and disconnect the ribbon cable by pressing down on it and sliding it out of the board. Once you’ve disconnected the ribbon cable, remove the board from the main housing and set it aside. Now you can take apart the remainder of the system. Use your screwdriver to remove the screws securing the hard drive. With the screws removed, flip the hard drive over and

How to open a PSslim console?

The cover of a playstation 4 is very easy to remove. You can simply pop it off by applying a slight downward force to it. It’s not that simple with the latest slim models though. You need to push the cover slightly inward and then remove it.

How to open a PSslim?

While it might sound easy, it can be quite an intimidating task to take apart a PlayStation 4 slim. The first step is to remove the two screws on the front of the console that secure the metal cover around the power button and disc drive. Once those are removed, take off the disc drive cover, which is held on with several small Phillips screws. Finally, take off the motherboard cover and you’ll be left with the system’s insides!

How to take apart a PSpro?

If you’ve bought a PlayStation 4 pro, you know they’re built a little differently than the standard PS4s. The most noticeable difference is that the power brick is much smaller. The PS4 pros have a smaller cooling system, and as a result, you’ll be able to access the system a little bit easier. There’s no need to take off the entire top of the system to access the board or the memory. While the PlayStation pro’

How to open a PSpro console?

Firstly, take off the power supply cover. To do this, press down firmly on the two sides of the cover at the same time. Now, press down on the top cover and slowly lift it. This will release the pressure of the metal clips, allowing the cover to come off. If you have trouble removing the cover, try using a hair dryer to heat it up. This will make it easier to remove the cover.