How to take apart a PS4 slim to clean?

Before you start removing any screws, remove the four screws that secure the front panel to the main body. These come in pairs, each with an L-shaped head. Once the screws are removed, you’ll be able to pull the front panel off the main body. After that, you can take off the disc drive on the front of the console and then the power supply. Once you have those out, you can access the motherboard

How to take apart a PSslim to clean inside?

If you want to take apart your ps4 for cleaning, you can do it quite easily. If you have never taken apart any electronics before, it might seem a little intimidating. Fortunately, it’s not too complicated! You’ll need a small Philips screwdriver, some antistatic cloth and a small suction cup (if you want to use a vacuum cleaner).

How to open a PSslim to clean button?

The PlayStation 4 Slim’s on-board cleaning button is located on the front right-hand corner of the system. It’s slightly raised, and can be depressed easily. To remove your system’s dust filter, press down on this button for about 30 seconds. When the light inside the button begins to flash, your filter is ready to be removed. After you have done this, you can use the included cleaning tool to clean the inside of your system.

How to open a PSslim to clean dust?

The easiest way to take apart a PS4 slim is to remove the two latches in the sides with a screwdriver. First, insert the screwdriver in the hole at the top of the console and press down gently. Now, rotate the screwdriver slightly and pull it out. Repeat this procedure for the other side. Now you can remove the front panel and pull out the internal components.

How to open a PSslim to clean?

The first step is to take apart the console. Since the PlayStation 4 is rather compact, it’s easy to take apart. First, remove the two screws on the side. These are located on either side of the disc drive. After removing these, you can take off the disc drive by pressing down on it gently. To gain access to the hard drive, remove the two screws located on the underside and remove it. Now, you can easily access the internal components of the console.