How to take apart PS4 controller to clean analog stick?

It is not a very hard task to take apart the PlayStation’s controller. For those of you who have not dismantled the controller yet, this may be because you are not sure what to do. Well, here are the easy steps to take apart the PlayStation gamepad First, disconnect the USB cable from the gamepad. Disconnect all the wires connected to the board. Now, remove the screw that is securing the faceplate. Now, you can easily take off the faceplate from

How to take apart PScontroller to clean D pad?

If you are wondering how to take apart pscontroller to clean D pad, then you are at the right place. The D pad on the right side of the console is quite susceptible to getting dirty. They are used while you are controlling the primary action in a fighting game. It is also used to navigate the menu of the game, so it is quite often that it gets dirtier than the other buttons. The D pad is made of rubber and it can easily get dirty by dust,

How to take apart PScontroller to clean analog sticks?

If you’ve noticed that your PS4 controller’s analog sticks are getting sticky, it’s usually because of dust or gunk buildup. To clean out your analog stick, you’ll need to take it apart. The best way to do this is to use a small screwdriver, a plastic pick, or tweezers to remove the two small plastic strips that secure the stick in the joy-con. You can use a screwdriver to carefully separate the two

How to take apart PScontroller to clean up controller?

The first thing you need to do when you want to clean your PlayStation 4 controller is to disassemble it. This is quite an easy task to do, as the process is straightforward and does not require any special tools. In order to do this, you will need to remove four screws that are located under the rubber bumper. After that, you will need to remove the plastic cover of the D-pad to expose the four screws that secure the D-pad to the main body. Once all

How to take apart PScontroller to clean trigger?

First, put your thumb on the trigger area of the right stick, and push it down. This will slightly expose the back of the stick, and allow you to remove it from the plastic housing. Once you've done this, you can use a small toothpick (or the end of a pen) to push out any debris that may be lodged in between the stick and the case. Finally, push the stick back in and reinstall the housing.