How to tape a broken toenail?
If the nail is broken and deformed, it is best to have it repaired rather than tape it. However, tape can sometimes be used to make it appear less noticeable and to hold it in place while the break heals. If you decide to tape a broken toenail the key is to use medical tape, not ordinary tape. Ordinary tape is too thick and will cut off the circulation under the toenail, making it hurt more and possibly cause infection. Before taping a broken
How to tape a broken toen
There are many ways to tape a broken toenail but the most common method is to use a medical tape. To make sure the tape doesn’t stick to the skin, apply a thin layer of petroleum jelly to the affected area before sticking the tape down. After applying the petroleum jelly, use medical tape to cover the nail bed and the surrounding area.
How to tape a broken toenail with a bandage and moleskin?
For this method, you will need a roll of medical tape, medical moleskin, and a pre-cut strip of tape. First, cut a piece of tape slightly longer than the length of the toenail. Next, tape the broken portion with the tape, covering the nail bed. Then, apply medical moleskin over the tape and wrap it tightly to create a nice, smooth look. If you're applying moleskin to the nail bed, don't use tape as a
How to tape a broken toenail with a bandage?
First, clean the nail with a nail scrubber. Make sure to remove all of the loose debris under the nail bed. Next, soak the toe in warm water to soften the nail. Using an electric nail clipper or file, trim the nail to a length that is slightly shorter than the diameter of the broken piece. If you’re unsure of how much to cut, just cut it a little shorter than the nail bed and file the edges.
How to tape a broken toenail on a boat?
Be careful and gentle when applying tape to a boat toenail. First, apply a protective layer of petroleum jelly to the toenail, and then tape it back on. If you’re not used to applying tape, it’s a good idea to practice a few times on a piece of cardboard first.