How to test refrigerator relay with multimeter?

This is a straightforward test and does not require any special tools. Just plug your refrigerator into a wall outlet and turn it on. Check if the light is on and off. If not, check the wires coming from the fridge, they should be fine. Now, remove the wires from the fridge. This is to prevent the electricity from flowing through you and your multimeter. Now, check the wires coming from the relay board. They should be white. If not, replace the faulty component. Now

How to test a refrigerator door relay with multimeter?

First, you need to identify the location of the refrigerator door relay. It can be located on the door or inside it. You can find the location of the relay easily as it is attached to the door hinge. The door hinge is located at the bottom of the refrigerator. Sometimes, the door has two or three door relays. If the refrigerator has many drawers, you will need to do the maintenance on the door relays one by one.

How to test relay with multimeter?

A refrigerator is a complex appliance and it includes several electric components working together. If one of them stops working, it will impact the overall performance of the refrigerator. One of the most common reasons behind the failure of a refrigerator is the faulty refrigerator relay. A refrigerator relay is a switch that when closed, it connects the motor to the compressor of the refrigerator. If the refrigerator relay fails to work, the refrigerator will not start and you will not hear any sound produced. The refrigerator operates with the help of

How to test a refrigerator relay with a multimeter?

To measure the resistance of the coil, connect the red probe to the COM terminal and the black probe to the NO. If resistance is lower than 25 Ω, the coil is bad. If the resistance is higher, it definitely looks bad and you should not take any chances. If the resistance is higher than 25 Ω, check the resistance of the coil again. If the resistance is still high, it means the relay is bad. If not, it is possible that the problem is

How to test refrigerator relay with multimeter and scope?

The first thing you need to do is to locate the refrigerator’s relay. It is usually located on the backside of the unit, usually under the rear panel. You will be able to see it easily with just a little bit of light. When the refrigerator is running, the relay is making contact and sending a signal to the compressor. There will be two wires attached to it. One is connected to the common. The other one is connected to the control wire. The control wire is