How to trim around pavers?

The most important thing when it comes to trimming around pavers is to never cut into the sand bed underneath the stone and never remove the sand. Doing so makes the sand compact, which can cause the pavers to crack or shift over time. When you trim around a stone, you should always use a sharp pair of shears and cut only as close to the stone as needed to remove everything that’s over the stone. After you complete the job, you should reposition the pa

How to trim around pavers without chipping?

Another option for trimming around pavers is to use sandblasting. This method involves sandblasting the edges of the pavers with sand and then applying sealant to the sandblasted surface. This method is best for coping with uneven edges, as the sandblasting makes the edges level.

How to trim around pavers with miter box?

A miter box is a handy tool for laying out angles when installing stone or concrete pavers. It allows you to set the corners of your paver project perfectly. When it comes time to actually trim the edges of the pavers, you’ll want to use a miter box as well. The box has a guide that allows you to set the angle at which you want to cut your stone (typically 45° or 60°). You will need to cut around the pavers with

How to trim around pavers with curves?

When stone pavers are used as part of a curved wall, it’s important to cut the grass and vegetation back around them to help them blend in with the stone. You don’t want to see grass growing around the edges of the pavers, as it can look unsightly and stand out against the stone. Also, keep in mind that the grass must be cut back an equal amount on all sides of each stone, whether you’re using multiple rows of pa

How to trim around paver edges?

You’ll need to trim the grass around the edges of each stone individually. Use a small electric trimmer, a pair of scissors or a sharp, snipping tool for small jobs. Use a circular saw to cut larger pieces. To do this, set the blade depth to the stone’s thickness and then slowly saw back and forth around the stone’s edge. If you don’t have a circular saw, you can use a hand saw. Just make sure you