How to trim Hardin plank siding?

The best way to trim Hardin plank siding is with a circular or band saw. This allows you to create clean, straight edges. If you don’t have a circular saw, you can use a jigsaw. Always wear safety gear, including eye protection, when using a circular saw.

After you’ve cut the board to length, hold the ends and snap them into place.

How to install hardin plank siding?

If you are doing your own siding installation, you will want to start by removing the top portion of the siding from the wall. Use a pry bar or a flathead screwdriver to loosen the siding. Once you have the siding loose, you will be able to tap the planks into place. Use a small level to make sure the planks are flat against the wall. Once the planks are in place, fasten them to the wall using the manufacturer’

How to trim hardin plank siding correctly?

Topping the wood siding with the right amount of caulk is one of the easiest ways to maintain a level appearance on your home. Once the caulk is dry, use a utility knife to scrape the surface level, then use a putty knife to smooth the edges. Apply the caulk on the top and sides of the siding using a caulk gun. Use a small, circular motion and ensure the caulk is thick enough to completely cover the wood.

How to trim hardin plank siding corners?

When you cut corners on two-by-six siding, make sure you use an appropriate miter and cut the two pieces at the same angle. It’s also a good idea to cut the corners with a circular saw, rather than a hand saw or coping saw. You’ll get a cleaner cut and fewer splinters.

How to trim hardin plank siding without gap?

You want to make sure that your siding gap is consistent all the way down the length of the house. If you see any siding that is a different length from the rest, it’s time to fix it. You can fix it by either reflooring the area or by trimming the siding so that it’s flush with the next board.