How to turn on water heater gas?

One of the most common reasons why a gas water heater won’t start is because of a gas leak. Leaks are caused by corroded or damaged gas pipes that allow gas to escape. Leaks are a safety hazard, so always turn off gas valves if you suspect a gas leak. If you have a gas water heater with a gas burners, then you should always ignite the burners before trying to turn the gas on.

How to turn off water heater gas valve?

If you have a gas water heater with a gas valve, first, turn it off at the main gas valve. Then, turn off the gas supply line at the water heater. Using a wrench or pliers, turn the water heater gas valve so that it is pointing down. Then, turn the gas on.

How to turn water heater gas on?

The water heater gas connection is located on the bottom of the water heater tank, either above or below the water level. The gas pipe is connected to a gas valve, which is located on the outside of the water heater. You need to turn the gas valve on before you can start the gas water heater.

How to turn water heater gas back on?

If you notice any flickering or hear a clicking noise, do NOT continue to turn gas back on. Contact a professional, such as a plumber, immediately to confirm that you have gas. If you have gas, call your gas company. They will be able to inspect the gas line and determine if it is safe to turn gas back on.

How to turn off water heater gas?

To turn off water heater gas, press the red stop button on the gas supply line near the water heater. Then turn the gas valve to the “off” position. If the gas valve is not visible, press the stop button on the wall near the water heater. If the water heater won’t turn off, press the reset button. This stops the gas supply from the water heater and allows the gas to safely escape.