How to turn on water heater pilot light?

The water heater has a glass cover over the thermostat You will need to remove it to access the thermostat and turn it on. The thermostat itself is usually located on the top or front of the water heater. Take off the cover and look for the “T” shaped thermostat. At its center is a small metal strip, this is the thermostat. If the strip is not visible, you will need to remove the top of the water heater

How to turn on water heater pilot light off?

If you are unable to locate the thermostat you may need to look at the water heater from underneath. Depending on the make and model, it may have a safety switch or a valve next to or behind the water heater tank. If you find the switch, toggle it to the “off” position. If you cannot find the switch, turn the water heater off at the breaker or faucet and then wait 30 seconds. Turn the water heater back on and try to locate

How to turn off water heater pilot light valve?

Check for a visible pin or screw on the water heater’s water heater pilot light valve. If you don’t see a pin or screw, you’ll need to turn off the circuit breaker that services the water heater. Once everything is off, you can access the valve by unlocking the clamp that holds the pin in place. The last step is to screw the valve back in and turn on the circuit breaker.

How to turn off water heater pilot light?

If you are unable to locate the thermostat or can’t figure out how to turn it on, there is a way to do it without the help of a professional plumber. Flush the cold water and hot water faucets for two minutes. After the water has drained, turn the thermostat to the off position. The water heater will now automatically turn the burner off. However, this method is not recommended if the water heater has ruptured or is leaking gas.

How to turn off water heater pilot light switch?

This can be done by turning off the gas supply to your water heater. You can do this by unplugging the gas supply line or turning the gas off at the meter. After doing this, you can check if the water heater has a pilot light. If it does not, then that means the gas burner is not working. If the water heater does have a pilot light, you can try switching off the breaker that supplies power to the water heater. If the breaker is not connected to the