How to unclog poop from toilet?

You know that feeling when you flush the toilet and poop comes out of the bowl but it just won’t go down. If you are cleansing your toilet more than twice a week, an accumulation of fat, hair and other gunk can cause your toilet to clog. Bacteria builds up in the bowl and starts to break down the fats, causing a terrible smell. Sometimes, it’s difficult to remove these clogs and we need to use the right toilet bowl cleaner to solve

How to unclog a clogged toilet from poop?

The first thing you need to do when your toilet is clogged is to fill it with water and plunge it. This may sound simple but it can turn out to be a daunting task if you didn’t do it before. If you are unable to do this, you may want to call a plumber. However, if you are planning to do this yourself, make sure you have a bucket of water handy. If you don’t have water, you can use a bucket of

How to unclog a clogged toilet from water?

The Number One thing that can cause a toilet to clog is the use of a large volume of water to clean it. To prevent this, cut down the amount of water you use while cleaning your toilet. Once you’re done flushing, turn off the water and wait a few minutes. If your toilet still won’t flush, check the flapper. If the flapper is broken or dislodged, replace it. If the flapper is fine, but the toilet

How to unclog a toilet from poop?

If the clog is in the bowl, use a plunger. If not, your toilet is flushing but won’t drain, so you need to find the exact source of the clog. Using a plunger can be ineffective because it can dislodge stubborn clogs that are lodged deep inside the pipe that connects the toilet to the sewer system. If your toilet is flushing fine but isn’t draining, it’s likely caused by a clogged sewer line.

How to unclog a toilet from water with plumber?

The first thing you should do is cut off the water supply to the toilet. To do this, turn the water off at the drain pipe or at the main faucet. Remove the stopcock at the end of the pipe. If there is no stopcock, remove the screw that connects the water supply hose with the toilet. If the water pipe is behind the toilet, you will have to remove the cover of the drain. This is where you will find the stopcock or the screw.