How to use a torque wrench correctly?

A torque wrench is a tool used for tightening nuts and bolts to manufacturer’s specifications. It ensures that nuts and bolts are tightened to the optimum amount of force, avoiding over-tightening which causes loosening over time. The torque wrench is used for tightening fasteners to either a specific torque or to a specific amount of revolutions.

How to use torque wrench correctly?

One of the most important things to know when using a torque wrench is to keep the wrench perpendicular to the threaded machine screw. Always make sure the wrench is at 90 degrees to the locknut’s threads. If you are using an electric torque wrench, make sure you check the torque settings. If you set the torque too high, you will strip the fastener. Try to keep the maximum torque setting under 20-30% of the fastener’s rating.

How to use a torque wrench properly?

To get a more accurate torque value, try using an electronic torque wrench. Electronic torque wrenches use an advanced technology to measure the amount of torque being applied to a fastener, giving you a more accurate result than feeler gages. Electronic torque wrenches are easier to use than traditional torque wrenches because they don’t need to be tightened in a clockwise or counterclockwise direction.

How to use a torque wrench correctly?

When using a torque wrench, make sure the jaws of the wrench are lined up correctly. If they are not, the wrench will not be able to create a torque that is even close to the amount of torque you are trying to apply. If the jaws are not lined up correctly, it will be impossible to apply the desired torque and the nut or bolt may become damaged. Always position the handle of the torque wrench at the same level as the nuts you are trying to loosen or tighten. To check

How to use a torque wrench correctly?