How to use Drano max build up remover in toilets?

For further cleaning in toilets, use two to four drops of Drano in the water. Let it sit for a few minutes, then use a cloth to scrub the bowl. If it becomes cloudy, repeat the process. Now leave the bowl to dry overnight.

How to use Drano max build up remover in the toilet bowl?

Pour the contents of the bottle into the toilet bowl. Let it sit for 30-60 minutes. If the toilet bowl is still stained, then run some water down to dislodge the unwanted buildup. If the stains are still visible, repeat the process. After removing the toilet bowl stains, scrub the bowl using a clean cloth. If the bowl still looks stained, or if you are unable to scrub the bowl clean, then use a cleanser and scrub it off. After scrubbing, rinse the

How

Leave the white foam in the bowl. Dispose of the contents down the toilet. Let the bowl drain. You can use a plunger to help remove the water and any residual detergent. Let the bowl dry completely. Pour the Drano into the bowl. Let it sit for a few minutes, until the bubbling stops. Let the bowl drain again. Remove any remaining residue. Pour the baking soda into the bowl and let it sit for a few more minutes to break down any hard-

How to use Drano max build up remover in the toilets at home?

To remove the gunk, you will need an easy to use, strong chemical that can cut through any kind of grease, oil, soap scum, and other debris in the toilet. This product does not only clean the bowl of your toilet, but it also removes any existing odors within the bowl. If your toilet has a stone or porcelain bowl, use a bucket to fill the bowl with water before pouring the chemical in. Pour the chemical into the water and allow the mixture to

How to use Drano max build up remover in the toilet bowl at home?

If your toilet bowl is clogged, first run some water to clear it. Flush the toilet, then add some Drano remover to the toilet bowl. Apply the Drano to the toilet bowl and let it sit for about 10 minutes. After that, scrub the sides of the bowl with a toilet brush. Use the brush gently so as not to wear off the enamel. Apply some more Drano remover to the toilet bowl and repeat the process until there is no more visible buildup