How to use Honeywell thermostat set hold run?
To Set the thermostat Set Run: press and hold down the Set button for 2 seconds while the thermostat is running. You’ll hear a beep when the thermostat recognizes the Set function has been activated. The thermostat will run for a set amount of time based on your programmed schedule.
How to set hold run on Honeywell alarm system?
To set hold run on your Honeywell thermostat press the hold run button on your thermostat when the desired temperature is reached. This will set the heating or cooling to continue to run at the set temperature until the temperature is changed again or the thermostat is turned off.
How to set hold run on my Honeywell system?
To set the hold run on your Honeywell HMTB9 or HMTB9T thermostat, press the hold run button twice. After a moment, press the hold run button again to confirm. You will notice the green “running” light will turn on and the temperature will start to change. The temperature will hold at the temperature you set when you first press the hold run button.
How to set hold run on a remote Honeywell system?
The best way to set the hold run on a remote Honeywell thermostat is to go into the thermostat settings and set the time and temperature preference that you want the system to reach. Then, in the thermostat menu, find the hold run setting and click it to change it to the setting you want. You can also turn hold run on or off from your smartphone or computer. Check the manual for your particular system for detailed information on how to do this.
How to set hold run on Honeywell system with remote?
You can set the hold run on your Honeywell thermostat with a remote if you have Z-Wave on your system. You can use the Z-Wave Plus remote to control the temperature, set the schedule, and turn on the heat or air conditioning when needed. To set the hold run, press and hold the Set button until it appears in the lower left corner of the thermostat screen. Then, press and hold the Set button again to enter the Set screen. Finally, press