How to use transfer tape with circuit explore air 2?

The circuit explore air 2 uses single-sided tape to attach the sensor to the tools. We have found it works best to use transfer tape to attach the sensors to the tools, especially when the sensor has a complicated shape. To use transfer tape, simply peel off the backing on the tape and press the sensor to the piece you want to attach the sensor to. The tape will stick to the tool, keeping the sensor in place. If you’ve never used transfer tape before, it can

How to use double sided adhesive transfer tape with circuit explore air

It’s always helpful to have a backup in case the first side of tape doesn’t stick properly. Use a single roll of circuit explore tape, and cut it so it’s about an inch longer than the length of the board you want to cover. Then, remove the backing from one side, and stick the tape onto the board. Now, peel off the protective backing from the other side, apply it to the board, and press down to remove any air pockets.

How to use double sided transfer tape with circuit explore air

The best thing about this tape is that it has two sides: one is a sticky side, and the other side is a perfect matte finish. This allows the tape to stick to itself when you need to use it to quickly secure something. When you don’t need to reuse the tape, simply peel it off the sticky side and put it away or toss it into the trash. The tape is also waterproof so it won’t be damaged by water.

How to use transfer tape with circuit explore air plus?

To use tape with the Circuit Explore Plus, place the tape on the board and use a small amount of pressurized air to guide the chip onto the board. The tape will stick to the board, so you won’t need to use additional adhesives.

How to use tape transfer with circuit explore air?

Circuit Explore air has two main parts: The printer side and the cartridge. The cartridge is where you’ll find your tape stock and the tape itself. The tape is attached to the cartridge with transfer tape. The tape is thin and sticky allowing it to easily cover the circuit board. Transfer tape can be applied to the board to transfer images, text, names, or any other type of image.