How to vacuum above ground pool to waste with cartridge filter

How to vacuum above ground pool to waste with cartridge filter?

The vacuum hose is attached to the canister of the filter itself. The vacuum hose should also be attached to a high-powered vacuum cleaner. The vacuum hose should then be attached to the filter cartridge and to the filter canister. The vacuum hose should be held in place by the filter cartridge. The vacuum hose can be adjusted to keep the filter in contact with the pool water. After the cartridge is attached, the vacuum cleaner is turned on. The hose should pull the water up through the filter

How to vacume above ground pools to bottom with cartridge filter?

If you want to get great performance from your cartridge filter you need to ensure that the filter cartridge is in good condition. When it’s time to change the filter cartridge, be sure to do it in a clean manner. Always clean the filter cartridge before changing it. This helps prevent contamination from the old filter cartridge. After you’ve drained the filter cartridge, you can rinse it off to remove any remaining debris. If you have a filter cartridge that’s difficult to clean

How to vacuum above ground pools to top with cartridge filter?

The cartridge filters are short and compact. They can be fitted onto any vacuum cleaner hose. When the vacuum cleaner is attached to the cartridge filter, the filter traps the dust and dirt passing through the vacuum cleaner. When the filter gets dirty, you can simply change it.

How to vacuum above ground pool with cartridge filter?

When it comes to cartridge filters, they are more compact than bag filters and will fit into the vacuum hose more easily. If you have a deeper pool, or are using a larger filter to help clean it more thoroughly, you may want to consider a canister vacuum with a hose.

How to vacuum above ground pools to trash with cartridge filter?

Using a hand held vacuum, remove the debris that is floating on the surface of the water. Once the debris is removed, continue vacuuming the surface to remove the fine dust. Don’t use a shop vacuum for this, as it can damage the filter. Once the filter is clean, turn it off and remove it for disposal.