How to vacuum above ground pool with Hayward sand filter?

Properly functioning sand filters help keep the water in your above ground pool clear and free from contaminants. When the filter is clogged with sand, it can leave your water cloudy or discolored. Vacuum the filter regularly to keep it from becoming clogged. When the filter is clogged, it will cause your pool water to have a bad taste. A Hayward sand filter can be vacuumed out with a hand auger, but if you want a larger cleaner, use a Hayward pool vacuum

How to vacuum above ground pool with Hayward sand filter cover?

To make sure that the sand filter keeps the air from circulating around the pool use a Hayward sand filter cover. The trick is to make sure the filter is securely attached to the pool. It’s also important to make sure that the filter cover fits properly around the skimmer (or pump in the case of above ground pools) to prevent air from being pulled from underneath the pool.

How to vacuum above ground pool with Hayward sand filter cover bag?

Finally, you will need to use the vacuum hose to pull the debris into the bag. You can secure the bag to the filter with the provided ties so it doesn’t slip off, then plug the other end of the hose and pull the debris into the bag. Be sure to hold down the bag so it doesn’t fly up into the air while trying to pull the debris in.

How to vacuum above ground pool with Hayward sand filter cover mesh?

The sand filter cover mesh is designed to catch the small particles that are trapped in the filter sand. Over time, the filter sand loses its ability to trap particles. If the filter becomes clogged, the filter will capture more debris and cause more frequent cycling. To prolong the life of your filter and maintain the best water quality, you need to periodically remove and clean the filter sand. Vacuum the filter with the sand filter cover over it. Doing this will help to dislodge any particles trapped in

How to clean an above ground pool with Hayward sand filter

Vacuum the pool bed and filter. Next, turn on the filter and let it run for about 20 minutes. Once the filter is running, turn on your hose and slowly move the hose back and forth over the filter and pool water. Leave the filter running as you wash the filter. For added efficiency, use a filter cleaning tool to clean the filter. When the filter is clean and dry, turn it off. Now, you can put your pool back into use!