How to winterize an above ground pool pump?

Most above ground pool have a large plastic motor housing that protects the pump from the elements. The motor housing is usually bolted to the pool deck and either has a drain in the bottom or a U-shaped drain pipe in the side. If your pool has a drain in the bottom, you can usually snap off the drain bolt and remove the pump. If you have a drain pipe in the side of the pool, you will need to remove the U-shaped drain pipe and the cover over it.

How to winterize an above ground pool pump on my own?

If you’re looking for a way to winterize an above ground pool pump without calling a professional, you’re in luck! With a little bit of research, you can winterize an above ground pool pump on your own. Remember, safety should always be the number one priority. While this method can be much cheaper than bringing in a professional, it’s extremely important that you follow these safety precautions for an effective and long-lasting winterizing system.

How to winterize an above ground pool?

The filter cartridge and pool skimmer should be completely drained of water prior to the pump being shut down. Once the pump is off, turn the pool water heater off and turn it back on. The water level should be above the skimmer and filter cartridge. If it is not, you will need to add water. After the water level is above the skimmer and filter cartridge, turn the water heater back on and allow it to heat up.

How do you winterize an above ground pool?

If you want to winterize your above ground pool, you will need to turn the pump off. If you are using a mechanical pump, turn it off using the on and off switch on the pump. If you are using an electric pool pump, unplug it. The electric pool pump will automatically turn off if there is no water in the pool, so you don’t need to worry about it. After turning off the pump, cover the pump, pool, and any other outdoor water

How to winterize an above ground pool pump and heater?

When the temperatures outside begin to drop, so should your heating system. After you’ve finished your regular monthly pool maintenance, it’s time to winterize your pool pump and heater. The best way to do this is by following the manufacturer’s recommendations. The pump should be drained of water and then completely disassembled. Make sure to clean any corrosion, dirt, or old chemicals off the pump before putting it back together. Put the pump back together and turn it on.