How to wire wrap drilled stones for rings?

If you are creating your own ring, using stone components that were not purchased from a jeweler or stone shop, you will need to have them drilled. If the stone is very hard, it may be difficult to drill the stone yourself. To make the process easier, you can use a diamond drill attachment. These devices are used for drilling concrete, metal, stone, and many other materials. They are easy to use and will create a hole in your stone that you can easily clean and then insert

How to wire wrap stone rings?

The stone rings are drilled and then the stone is glued into the ring. If the stone is very large, the hole can be deeper. The stone is then placed in the ring and held in place with tape. When the stone is in place, a small gap remains between the stone and the ring so that the wires can be threaded into the hole. A stone ring is easy to do and gives an incredibly unique look to a ring.

How to wire wrap rocks for rings?

The ring stone wires are done with fine wires that are stronger than the stone itself. The process is done by drilling holes into the stone, then inserting the wires into the holes and tightly twisting it. This makes the stone stronger. The result is a stone ring that can withstand more pressure. This process is similar to the one used for drilling stone sculptures and works best with soft stone like granite.

How to wire wrap stones rings?

When working with stone rings, the wiring process is a little more challenging. As mentioned before, drilling requires a hole that is slightly larger than the stone’s diameter. This is so the stone can be comfortably held in place while the hole is made larger. When it comes to ring wiring, you need to be able to see the stone’s surface to be sure the hole is even. To make sure the stone’s surface is visible, mark the stone’s diameter

How to wire wrap a stone ring?

The first process involves drilling the stone to make a hole big enough to fit your ring shank. After you’ve done this, you need to clean the stone and sand it down to provide a smooth surface for the wire to adhere to. A wire brush and fine sandpaper will do the trick. As you continue, you want to make sure that the stone is at a level that allows the stone to sit flush with the inside of the ring. This is a good habit to have when