My TV won't turn on, but the red light is on hi sense?

This issue is mostly caused by a bad power supply. If you have a surge or a fluctuation in the electricity, it will cause the TV to go into a standby mode. This is also the reason why you will notice a flickering blue screen when you try to turn on your TV. To fix it, make sure that the power supply is properly connected to the TV. If you notice the flickering blue screen even after you have replaced the power supply, it is likely to be the TV itself.

My TV won't turn on,

If you're having problems with your tv turning on, check the remote first. If the TV is brand new, chances are the remote is broken. If the TV still won't turn on, it's possible that the TV is having a power issue. Try plugging the TV into another outlet or by using an extension cord. If the problem continues, it's possible that the TV has a blown fuse or is just defective. If you have a power strip connected to your TV or another appliance,

My TV won't turn on, but the red light is on?

If your TV won’t turn on, but the light is on, you most likely have a dead TV. These are the most common reasons why a TV won’t turn on: The TV’s power cord is unplugged. If the TV’s plug is loose or broken, turn it off and unplug it. The TV’s power cord could also be damaged. Replace the cord if it appears damaged. If the TV still won’t

My TV won't turn on, but the red light is blinking?

This is usually an indicator that the TV is in standby mode. Unplug or disconnect your TV from any power sources, including wall outlets, extension cords, and power strips. Then, press and hold the power button for 5 seconds, and when the TV boots up, check to see if it turned on. If not, try again. If your TV still won’t turn on, replace your TV or contact an authorized service provider for help.

My TV will not turn on, but the red light is on?

The red light on your television indicates the power is flowing to the unit. If the power is off at the wall or in the breaker box, the TV will not turn on. This is often caused by a wire that has come loose from its connection. If you have a television that was recently purchased or given as a gift, make sure the wiring connections are secure. If your television has a dead screen, you can try cleaning it with some glass cleaner. Be careful not to use any cleanser