Why won't my hi sense TV turn on, but the red light is on?

If the red light is on, it’s possible that your tv has a faulty high sense sensor. Try to press the power button while you put your hand over the sensor, or use a remote to press the power button. Sometimes the same problem can occur with the remote. If this doesn’t fix the issue, it’s probably best to have it serviced.

Why won't my dtv turn on and off?

If your home entertainment system has stopped working, it is likely due to a power outage that has affected your tv or other equipment. If you are using a converter box, make sure it is set properly. It is also possible that your TV is simply damaged. If this is the case, you will need to visit an authorized service center to have it repaired.

Why won't my DTV turn on?

If your DTV won't turn on, press and hold the power button for 10 seconds. Now, press the red button on the front of the DTV, and press the standby button at the same time. Your DTV should turn on. If it doesn’t, check the remote’s batteries and try again. If it still won’t turn on, check the DTV’s power cord. If the cord is damaged, replace it. Also, make

Why won't my hi sense TV turn on again?

Be careful not to over-tighten the screw on the board. Doing so may force the board out of place, which will cause a connection issue. Also, the board may not have been properly connected to the charging unit all along, or the charging unit may have gone bad due to exposure to moisture. If you think this is the case, contact the manufacturer for more help.

Why won't my hi sense TV turn on?

If you're trying to turn on your TV, but nothing happens, there could be a problem with the wiring. If there are visible signs of damage, you may need to have the wiring checked. If the wiring appears to be in good condition, it might be a problem with the TV, such as an unsecured remote or an obsolete power supply.